Notices And Statements In This Document; Server Features And Specifications - Lenovo System x3650 M4 Installation And Service Manual

The ToolsCenter for System x and BladeCenter is an online information center that contains information
about tools for updating, managing, and deploying firmware, device drivers, and operating systems. The
ToolsCenter for System x and BladeCenter is at http://publib.boulder.ibm.com/infocenter/toolsctr/v1r0/.
The server might have features that are not described in the documentation that you received with the server.
The documentation might be updated occasionally to include information about those features, or technical
updates might be available to provide additional information that is not included in the server documentation.
These updates are available from the website. To check for updates, go to http://www.lenovo.com/support.

Notices and statements in this document

The caution and danger statements in this document are also in the multilingual Safety Information
document, which is on the System x Documentation CD. Each statement is numbered for reference to the
corresponding statement in your language in the Safety Information document.
The following notices and statements are used in this document:
• Note: These notices provide important tips, guidance, or advice.
• Important: These notices provide information or advice that might help you avoid inconvenient or
problem situations.
• Attention: These notices indicate potential damage to programs, devices, or data. An attention notice is
placed just before the instruction or situation in which damage might occur.
• Caution: These statements indicate situations that can be potentially hazardous to you. A caution
statement is placed just before the description of a potentially hazardous procedure step or situation.
• Danger: These statements indicate situations that can be potentially lethal or extremely hazardous
to you. A danger statement is placed just before the description of a potentially lethal or extremely
hazardous procedure step or situation.

Server features and specifications

The following information is a summary of the features and specifications of the server. Depending on the
model, some features might not be available, or some specifications might not apply.
Table 1. Server features and specifications
Microprocessor (depending on the
model):
• Supports up to two Intel Xeon™
E5-2600 series multi-core
microprocessors (one installed)
• Level-3 cache
• Two QuickPath Interconnect (QPI)
links speed up to 8.0 GT per
second
Notes:
• Use the Setup utility program to
determine the type and speed of
the microprocessors.
• For a list of supported
microprocessors, see
http://www.lenovo.com/
serverproven/.
6
Lenovo System x3650 M4 Installation and Service Guide
Integrated functions:
• Integrated Management Module
II (IMM2), which consolidates
multiple management functions in
a single chip.
• Intel I350AM4 Quad Port Gigabit
Ethernet controller with Wake on
LAN support
• Eight Universal Serial Bus (USB)
2.0 ports (two front and four rear of
the chassis, one internal used for
USB tape drive, and one internal
used for Hypervisor USB key)
• Six network ports (four 1 Gb
Ethernet ports on the system
board and two additional ports
when the optional Dual-Port 10
Gb Network Daughter Card is
installed)
SATA optical drives (optional):
• DVD-ROM
• Multi-burner
Tape drive (optional):
• Tape drive bay
RAID controllers (depending on the
model):
• One on-board 8 ports SAS
ServeRAID M5110e that provides
RAID levels 0, 1, and 10
• A ServeRAID M5110e SAS/SATA
adapter that provides RAID 0, 1,
and 10.Optional upgrade:
– RAID 5/50 (Zero Cache)