Lenovo System x3650 M4 Installation And Service Manual page 272

Figure 175. DVD drive cable connection
Step 11. Reconnect the power cords and any cables that you removed.
Step 12. Turn on the peripheral devices and the server.
Removing the DVD drive cable
Use this information to remove the DVD drive cable.
To remove the DVD cable, complete the following steps:
Step 1. Read the safety information that begins on "Safety" on page v and "Installation guidelines"
on page 34.
Step 2. Turn off the server and peripheral devices and disconnect the power cords.
Step 3. Remove the cover (see "Removing the cover" on page 240).
Step 4. Remove the air baffle (see "Removing the air baffle" on page 241).
Step 5. Press and hold the connector release tab; then, remove the DVD drive cable from the connector
on the system board.
260
Lenovo System x3650 M4 Installation and Service Guide
Release tab
Optical drive
connector
DVD drive
cable
Cable connector
latch