Lenovo System x3650 M4 Installation And Service Manual page 277

Replacing a tape drive
Use this information to install a tape drive.
To install an optional DVD drive, complete the following steps:
Step 1. Read the safety information that begins on "Safety" on page v and "Installation guidelines"
on page 34.
Step 2. Turn off the server and peripheral devices and disconnect the power cords and all external cables.
Step 3. Remove the cover (see "Removing the cover" on page 240).
Step 4. If the tape drive came with metal spacers on the installed on the sides, remove the spacers.
Step 5. Install the drive tray on the new tape drive as shown, using the four screws that you removed
from the former drive.
Figure 182. Screws installation
Step 6. Prepare the drive according to the instructions that come with the drive, setting any switches
or jumpers.
Step 7. Slide the tape-drive assembly most of the way into the tape-drive bay.
Figure 183. Tape drive installation
.
Chapter 6 Removing and replacing components
265