Removing And Reinstalling The System Board Shield - Lenovo ThinkCentre E93z Hardware Maintenance Manual

5. Remove the screw
it from the cable and remove it out of the computer.
Figure 18. Removing the optical drive
6. Slide the new optical drive into the optical drive bay until the new optical drive cable is connected to the
cable and secured in place. Install the screw to secure the new optical drive.
Figure 19. Installing the optical drive

Removing and reinstalling the system board shield

Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
2 "Safety information" on page 3.
1 that secures the optical drive. Then slide the optical drive as shown to disconnect
.
Chapter 9 Replacing FRUs
85