Configuring Capwap Access Points - Cisco Catalyst 4500 Series Software Configuration Manual

How to Configure DHCPv6 Options Support
ADVERTISE 1
REPLY 1
debug ipv6 dhcp-ldra all
Step 4
Enables all LDRA debugging flows. The fields in the example below are self-explanatory.
Example:
Device# debug ipv6 dhcp-ldra all
05:44:10: DHCPv6 LDRA API: Entered ipv6_dhcp_ldra_post_processor.
05:44:10: DHCPv6 LDRA EVENT: [Gi1/0/3 Vlan 5] Received SOLICIT from 2001:DB8:1::1 to
FF02::1:2.
05:44:10:
05:44:10:
05:44:10:
05:44:10:
05:44:10: 000300010015F906981B
05:44:10: option ORO(6), len 4
05:44:10: DNS-SERVERS,DOMAIN-LIST
05:44:10: option IA-NA(3), len 12
05:44:10: IAID 0x00040001, T1 0, T2 0
05:44:10: DHCPv6 LDRA API: Entered dhcpv6_ldra_client_facing_new_pak.
05:44:10: DHCPv6 LDRA EVENT: [Vlan 5] Sending RELAY-FORWARD from 2001:DB8:1::1
to FF02::1:2.
!
!
!

Configuring CAPWAP Access Points

Command or Action
Step 1
Device> enable
Step 2
Device# configure terminal
Step 3
Device(config)# ipv6 dhcp pool poolname
Step 4
Device(config-dhcpv6)# capwap-ac
address ipv6-address
Step 5
Device(config-dhcpv6)# end
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.8.0E and IOS 15.2(4)E
61-8
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Configures a DHCPv6 server configuration information pool and
enters DHCPv6 pool configuration mode.
Configures CAPWAP access controller address.
Exits DHCPv6 pool mode and returns to privileged EXEC mode.
Chapter 61 DHCPv6 Options Support