Cisco Catalyst 4500 Series Software Configuration Manual page 1849

Chapter 74 Configuring Flexible NetFlow
Table 74-6
Field
IPv6 Fields
destination address
dscp
flow-label
is-multicast
hop-limit
hop-limit minimum
hop-limit maximum IPv6 maximum hop limit
next-header
total length
Total length
minimum
Total length
maximum
protocol
source address
traffic-class
Routing Attributes
forwarding-status
Layer 4 Header Fields
Field
TCP Header Fields
destination-port
TCP destination
number
flags [ack] [fin]
[psh] [rst] [syn]
[urg]
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Options Available through FNF and the Supported Fields
Description
IPv6 destination address
IPv6 DSCP (part of IPv6
traffic class)
IPv6 flow label
Indicator of an IPv6
multicast packet (0 - if
it's not, 1 - if it is)
IPv6 hop limit (replaces
IPv4 ttl)
IPv6 minimum hop limit
value seen in the flow.
value seen in the flow.
IPv6 next header type
IPv6 total packet length
Minimum packet size
seen
Maximum packet size
seen
IPv6 next header type in
the last IPv6 extension
header
IPv6 source address
IPv6 traffic class
Forwarding status for the
packet (forwarded,
terminated in the router,
dropped by ACL, RPF,
CAR)
Description
TCP destination port
TCP flags.
Comments
Supported as a
non-key field
Values are reported
based on Table 74-4.
Supported as a
non-key field.
Supported as a
non-key field.
Only first next header
is reported
Values are based on
Table 74-5.
Yes
Supported as a
non-key field
Comments
Supported as non-key
fields.
Non-VSS Environment
74-13