Verifying The Lrda Configuration - Cisco Catalyst 4500 Series Software Configuration Manual

Chapter 61 DHCPv6 Options Support

Verifying the LRDA Configuration

show ipv6 dhcp interface
Step 1
Displays DHCPv6 interface information.
Example:
Device# show ipv6 dhcp interface
GigabitEthernet0/1 is in relay mode
Relay destinations:
3FFB:C00:C18:6:A8BB:CCFF:FE03:2701
Serial3/0 is in relay mode
Relay destinations:
3FFB:C00:C18:6:A8BB:CCFF:FE03:2600
FE80::A8BB:CCFF:FE03:2801 on Serial3/0
FF05::1:3
show ipv6 dhcp-ldra
Step 2
Displays LDRA configuration details. The fields in the example given below are self-explanatory.
Example:
Device# show ipv6 dhcp-ldra
DHCPv6 LDRA is Enabled.
DHCPv6 LDRA policy: client-facing-disable
DHCPv6 LDRA policy: client-facing-trusted
DHCPv6 LDRA policy: client-facing-untrusted
DHCPv6 LDRA policy: server-facing
Step 3 show ipv6 dhcp-ldra statistics
Displays LDRA configuration statistics before and after initiating a DHCP session. The fields in the
examples below are self-explanatory
Example:
Device# show ipv6 dhcp-ldra statistics
Messages received 2
Messages sent 2
Messages discarded 0
Messages Received
SOLICIT 1
REQUEST 1
Messages Sent
RELAY-FORWARD 2
Messages received 2
Messages sent 2
Messages discarded 0
Messages Received
RELAY-REPLY 2
Messages Sent
Target: none
Target: vlan 5
Target: none
Target: Gi1/0/7
DHCPv6 LDRA client facing statistics.
DHCPv6 LDRA server facing statistics.
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.8.0E and IOS 15.2(4)E
.
How to Configure DHCPv6 Options Support
61-7