Creating An Lldp Filter - Cisco Catalyst 4500 Series Software Configuration Manual

Chapter 49 Configuring 802.1X Port-Based Authentication
Command
Step 3
tlv {name tlv-name | number
tlv-number}
Switch(config-sensor-cdplist)# tlv
number 10
Step 4
end
Switch(config-sensor-cdplist)# end

Creating an LLDP Filter

To create an LLDP filter containing a list of TLVs that can be included or excluded in the Device Sensor output, follow these
steps, beginning in privileged EXEC mode:
Command
Step 1
configure terminal
Switch# configure terminal
Step 2
device-sensor filter-list lldp list
tlv-list-name
Switch(config)# device-sensor
filter-list lldp list lldp-list
Step 3
tlv {name tlv-name | number
tlv-number}
Switch(config-sensor-cdplist)# tlv
number 10
Step 4
end
Switch(config-sensor-lldplist)# end
Creating a DHCP Filter
To create a DHCP filter containing a list of DHCP options that can be included or excluded in the Device Sensor output, follow
these steps, beginning in privileged EXEC mode:
Command
Step 1
configure terminal
Switch# configure terminal
Step 2
device-sensor filter-list dhcp list
option-list-name
Switch(config)# device-sensor
filter-list dhcp list dhcp-list
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Purpose
Adds individual CDP TLVs to the TLV list. You can delete the TLV
list without individually removing TLVs from the list by using the no
device-sensor filter-list cdp list tlv-list-name command.
Returns to privileged EXEC mode.
Purpose
Enters global configuration mode.
Creates a TLV list and enters LLDP sensor configuration mode, where
you can configure individual TLVs.
Adds individual LLDP TLVs to the TLV list. You can delete the TLV
list without individually removing TLVs from the list by using the no
device-sensor filter-list lldp list tlv-list-name command.
Returns to privileged EXEC mode.
Purpose
Enters global configuration mode.
Creates an options list and enters DHCP sensor configuration mode,
where you can specify individual DHCP options.
Configuring Device Sensor
49-119