Cisco Catalyst 4500 Series Software Configuration Manual page 1330

Configuring 802.1X Port-Based Authentication
IPv6 Address:
IPv4 Address:
User-Name:
Status:
Domain:
Oper host mode:
Oper control dir:
Session timeout:
Common Session ID:
Acct Session ID:
Handle:
Current Policy:
Server Policies:
URL Redirect ACL:
ACS ACL:
Filter-ID:
Method status list:
Method
mab
The following command displays the contents of the per-user-acl (note that per-user-acl are shown above as the default port
ACL configured on the interface, 151 is the default port ACL in the following example):
Switch# show access-list
151
deny ip host 20.20.0.3 host 20.20.10.10
10 permit ip any any (57 estimate matches)
The following command displays the number of sessions:
RouterRP# show authentication sessions
Interface MAC Address
Gi2/9 aabb.cc00.5600 mab
Session count = 1
Key to Session Events Status Flags:
A - Applying Policy (multi-line status for details)
D - Awaiting Deletion
F - Final Removal in progress
I - Awaiting IIF ID allocation
P - Pushed Session (non-transient state)
R - Removing User Profile (multi-line status for details)
U - Applying User Profile (multi-line status for details)
X - Unknown Blocker
The following command displays authentication sessions that contains the per-user-acl:
S2049# show authentication sessions int gi 2/9 det
Interface:
MAC Address:
IPv6 Address:
IPv4 Address:
User-Name:
Status:
Domain:
Oper host mode:
Oper control dir:
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
49-50
Unknown
7.7.7.19
2C-54-2D-6A-03-44
Authorized
DATA
multi-auth
both
N/A
0A4046D50000009C0310AB47
0x000000E7
0xF3000061
POLICY_Gi2/9
testacl
xACSACLx-IP-PERMIT_ALL_TRAFFIC-51def075
100
State
Authc Success
Method Domain Status Fg Session ID
VOICE Auth
GigabitEthernet2/9
ccdd.aabb.0001
Unknown
6.6.65.66
ccddaabb0001
Authorized
DATA
multi-auth
both
Chapter 49 Configuring 802.1X Port-Based Authentication
0D0102340000000CEDF12589