Cisco Catalyst 4500 Series Software Configuration Manual page 1518

Monitoring Wireless CoPP
Class-map: system-cpp-dot11-rrm (match-all)
Class-map: system-cpp-dot11-rfid (match-all)
Class-map: system-cpp-dot11-iapp (match-all)
Class-map: system-cpp-dot11-mgmt (match-all)
Class-map: class-default (match-any)
To clear the counters on the wireless control plane, enter the clear control-plane-wireless * command:
Switch# clear control-plane-wireless *
Switch#
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
57-14
exceeded 0 bytes; actions:
drop
conformed 0000 bps, exceeded 0000 bps
0 packets
Match: protocol dot11-rrm
police:
cir 64000 bps, bc 2000 bytes
conformed 0 bytes; actions:
transmit
exceeded 0 bytes; actions:
drop
conformed 0000 bps, exceeded 0000 bps
0 packets
Match: protocol dot11-rfid
police:
cir 64000 bps, bc 2000 bytes
conformed 0 bytes; actions:
transmit
exceeded 0 bytes; actions:
drop
conformed 0000 bps, exceeded 0000 bps
0 packets
Match: protocol dot11-iapp
police:
cir 64000 bps, bc 2000 bytes
conformed 0 bytes; actions:
transmit
exceeded 0 bytes; actions:
drop
conformed 0000 bps, exceeded 0000 bps
0 packets
Match: protocol dot11-mgmt
police:
cir 64000 bps, bc 2000 bytes
conformed 0 bytes; actions:
transmit
exceeded 0 bytes; actions:
drop
conformed 0000 bps, exceeded 0000 bps
0 packets
Match: any
police:
cir 64000 bps, bc 2000 bytes
conformed 2091205 bytes; actions:
transmit
exceeded 0 bytes; actions:
drop
conformed 0000 bps, exceeded 0000 bps
Chapter 57 Configuring Control Plane Policing and Layer 2 Control Packet QoS