Cisco Catalyst 4500 Series Software Configuration Manual page 1931

Chapter 77 Configuring Call Home
Table 77-3 Call Home Alert Groups, Events, and Actions (continued)
Call Home
Alert Group Trigger Event
SYSLOG
SYSLOG
SYSLOG
SYSLOG
SYSLOG
SYSLOG
SYSLOG
Environmental
TEMP_FAILU
RE
TEMP_FAILU
RE
TEMP_FAILU
RE
TEMP_FAILU
RE
TEMP_FAILU
RE
TEMP_RECO
VER
POWER_FAIL
URE
POWER_REC
OVERY
POWER_FAIL
URE
POWER_
RECOVERY
POWER_REC
OVERY
POWER_FAIL
URE
Syslog Event
LOG_ALERT
LOG_CRIT
LOG_ERR
LOG_WARNING
LOG_NOTICE
LOG_INFO
LOG_DEBUG
TempHigh
Critical Temp
Shutdown Temp
Some Temp Sensors
Failed
All Temp Sensors
Failed
TempOk
PowerSupplyBad
PowerSupplyGood
PowerSupplyFanBad
PowerSupplyFanGood
PowerSupplyOutputInc
reased
PowerSupplyOutputDe
creased
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Severity Description and CLI Commands Executed
6 Action must be taken immediately.
5 Critical conditions.
4 Error conditions.
3 Warning conditions.
2 Normal but signification condition.
1 Informational.
0 Debug-level messages.
Events related to power, fan, and environment sensing
elements, such as temperature alarms. (Sent to TAC.)
CLI commands executed:
show module
show environment
show logging
show power
show inventory
5 The temperature of the chassis is above the normal
threshold.
5 The temperature of the chassis has risen above the
critical threshold.
5 The temperature of the chassis is very high and the
system will be shut down.
3 Some of the temperature sensors have failed.
5 All temperature sensors have failed.
5 The temperature of the chassis is normal.
5 A power supply has failed or has been turned off.
5 A failed power supply has been fixed.
3 A power supply fan has failed.
3 A failed power supply fan has been fixed.
3 A power supply output has increased.
3 A power supply output has decreased.
Alert Group Trigger Events and Commands
77-19