Configuring Dynamic-Access Ports On Vmps Clients - Cisco Catalyst 2960 series Configuration Manual

Configuring VMPS
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2 vmps server ipaddress primary
Example:
Switch(config)# vmps server 10.1.2.3 primary
Step 3 vmps server ipaddress
Example:
Switch(config)# vmps server 10.3.4.5
Step 4
end
Example:
Switch(config)# end
Step 5
show vmps
Example:
Switch# show vmps
Step 6 copy running-config startup-config
Example:
Switch# copy running-config startup-config

Configuring Dynamic-Access Ports on VMPS Clients

Dynamic-access port VLAN membership is for end stations or hubs connected to end stations. Connecting
Caution
dynamic-access ports to other switches can cause a loss of connectivity.
OL-29065
Configuring Dynamic-Access Ports on VMPS Clients
Purpose
Enters the global configuration mode.
Enters the IP address of the switch acting as the primary
VMPS server.
(Optional) Enters the IP address of the switch acting as a
secondary VMPS server.
You can enter up to three secondary server addresses.
Returns to privileged EXEC mode.
Verifies your entries in the VMPS Domain Server field of
the display.
(Optional) Saves your entries in the configuration file.
Catalyst 2960-X Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX
85