Feature Information For Dhcpv6 Options Support - Cisco Catalyst 4500 Series Software Configuration Manual

Feature Information for DHCPv6 Options Support

Feature Information for DHCPv6 Options Support
The following table provides release information about the feature or features described in this module.
This table lists only the software release that introduced support for a given feature in a given software
release train. Unless noted otherwise, subsequent releases of that software release train also support that
feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image
support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is
not required.
Table 1 Feature Information for DHCPv6 Options Support
Feature Name
CAPWAP Access Controller DHCP
Option 52
DHCPv6 Interface-ID
DHCPv6 Relay Agent
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.8.0E and IOS 15.2(4)E
61-12
Releases
Cisco IOS
Release 15.2(5)E2
Cisco IOS
Release 15.2(5)E2
Cisco IOS
Release 15.2(5)E2
Chapter 61
Feature Information
The Control And Provisioning of Wireless Access
Points (CAPWAP) protocol allows Lightweight
Access Points to use DHCPv6 to discover a Wireless
Controller to which it can connect.
The interface-ID option is used by relay agents to
decide which interface should be used when
forwarding a RELAY-REPLY packet.
A DHCP relay agent, which may reside on the client's
link, is used to relay messages between the client and
server.
DHCPv6 Options Support