Modifying Network Settings - Extron electronics Quantum Ultra User Manual

13.

Modifying Network Settings

To change the IP addresses of the LAN A and LAN B ports:
1.
2.
3.
A prompt appears, telling you to reboot the Quantum Ultra. Click
Figure 40. Reboot Prompt after Firmware Update
The Quantum Ultra restarts with the new firmware.
ATTENTION:
• Wait until the opening screen appears before performing any other
operations.
•
Attendez jusqu'à ce que l'écran d'accueil apparaisse avant d'effectuer une
quelconque opération.
On the window, click the
Control Panel
window opens.
Settings
Figure 41. Network Settings for LAN A Port
If desired, enter a name of 1 to 15 characters for your Quantum Ultra. Only letters,
numbers, and the hyphen (
-
NOTE: All letters in the
Device Name
Select the tab for the LAN port (
Quantum Ultra Videowall Processing System • Operation
Network Settings
) can be used in this name.
are displayed in uppercase.
or to configure.
LAN A LAN B)
.
OK
button. The
Network
38