Extron electronics Quantum Ultra User Manual page 65

3. Edit IP address settings for your device as needed.
a. In the
Select Device(s) to Add
Figure 51. Editing a Device IP Address
b. The
Communication Settings
address and edit other IP settings as desired.
To enable Dynamic Host Configuration Protocol (DHCP), select the
checkbox. When this box is selected, an available IP address is assigned
automatically to the Quantum when it is connected to a supporting network.
(When this box is selected, all other IP settings fields become read-only.)
If you added this device manually, click the
button (shown at right) on the taskbar. On the
screen, click the
Communication Settings
figure 52, ) to display the
1
box.
Figure 52. Device Details Screen
For detailed instructions on using the VCS to configure the videowall, see the VCS Help
File, provided with the software.
Quantum Ultra Videowall Processing System • Remote Configuration and Control
panel, click the
Edit
dialog box opens. In this window, enter a new IP
Device Settings
Device Details
button (see
Communication Settings
button (see figure 51,
1
DHCP
dialog
).
57