Using This Manual; Troubleshooting - 3rdTech DeltaSphere-3000 User Manual

1.1

Using This Manual

Set-up and Installation
Section 2 describes the set up of the DeltaSphere hardware and SceneVision software.
Background Information
Section 3 is an introduction to SceneVision software, including basic information about data
types and file formats.
Scanning
Section 4 is a guide to scanning with the DeltaSphere and SceneVision. All users should read
this section before operating the DeltaSphere-3000.
DeltaSphere Color Option
Section 5 describes the DeltaSphere color option set up.
Section 6 is a guide to range and color capture with the DeltaSphere and SceneVision.
SceneVision Functions – Data Preparation, Annotation, Analysis, and Editing
Sections 7 and 8, on Viewing Tools and Annotation and Analysis Tools, are principally for those
involved with viewing and analysis of DeltaSphere data, though they may be of interest to all
users.
Sections 9 and 10, on Range Alignment and Color Alignment, are primarily for those involved in
data preparation. They describe the alignment needed to combine multiple scans and to add
color to a scan.
Section 11describes how to create 3D models and Section 12 how to edit those models.
SceneVision Reference Guide
Section 13 is a reference to all of the functions found in SceneVision-3D, organized by menu.
This is often the easiest place to locate information about a particular function.

Troubleshooting

Section 14 provides troubleshooting information.
Appendix
The Appendix, Section 15, includes technical information for programmers, as well as some
useful details about the system configuration.
DeltaSphere-3000 3D Scene Digitizer 4 9/23/05