3rdTech DeltaSphere-3000 User Manual page 14

6. For the Program Folder, accept the default DeltaSphere.
7. The installer will now copy files and set up icons. When complete, the Start Menu
SceneVision License
The SceneVision-3D license locks the software to a particular PC. Completing the software
installation requires contacting 3rdTech for a license key particular to your computer. To do
this:
1. Run SceneVision-3D once (by double-clicking on the desktop icon or selecting SceneVision-
2. Follow the instructions displayed after you run the program. It will show a machine serial
The DeltaSphere-3000 User Manual (this document) is in the file Delta_Manual_v3.0a.pdf. To
open the file, either go to the Start menu and select Programs -> DeltaSphere -> DeltaSphere-
3000 User Manual or run SceneVision-3D and select Help from the program's Help menu.
Display Setting
SceneVision-3D requires running your display in 24-bit or 32-bit mode. SceneVision will not
run without one of these settings! To check your display settings:
DeltaSphere-3000 3D Scene Digitizer
DeltaSphere folder will open. Click Finish to end the installation procedure (you may need to
move or close the DeltaSphere folder to see the Finish button).
3D from the DeltaSphere folder in the Start menu) to get the registration information you'll
need to send to 3rdTech.
number which you should email to 3rdTech. 3rdTech will use this number to send you a file
that will unlock the SceneVision program.
Note: You can run SceneVision up to 10 times before receiving this license file.
After installing the file you can run the program indefinitely on that PC.
Note: You must run the program at least one time with administrator privileges
after installing the license before those without administrator privileges can use
the program.
•
Go to your Windows Start menu (usually in the bottom left-hand corner of your
screen).
•
Click on Start, then Settings, and then Control Panel. (On some systems there is no
Settings selection – the Control Panel is visible in the Start menu.) One of the items
in this window will be Display.
•
Double click on Display and a window will appear.
•
Select the Settings tab near the top of the window.
•
Under Color quality, Colors or Color Palette (depends on your version of Windows)
you must have either 24 bit or 32 bit selected. (It also might say True Color, Highest,
or it might have the number of colors which must be at least 16,000,000.) If you do
not have one of these options your system's graphics are insufficient for
SceneVision. If one of these settings is available and you change the display by
making the selection, select OK and the system will test the new configuration. If
there is any problem you will have the option of switching back to the previous
setting.
13 9/23/05