Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for 3rdTech DeltaSphere-3000
Summary of Contents for 3rdTech DeltaSphere-3000
- Page 1 DeltaSphere-3000 3D Scene Digitizer and SceneVision-3D Quick guides 3rdTech, Inc. Copyright © 2005 3rdTech, Inc. 9/23/2005 3rdTech, Inc.
-
Page 2: Setting Up The Deltasphere-3000
Setting Up the DeltaSphere-3000 1. Set up the tripod in a central location for a ‘reference’ scan; or in a location that needs to be scanned first - before the scene changes. Make it relatively level. If using the dolly, place it on the dolly and lock the legs in place. -
Page 3: Range Scanning With The Deltasphere-3000
Range Scanning with the DeltaSphere-3000 Your system is set up and warmed up as described in quick guide I, and SceneVision is running and connected to the DeltaSphere-3000. 1. Raise the geared column on tripod 8 in. (20.3cm) using the 8” measuring rod or some other measurement. -
Page 4: Capturing Color With The Deltasphere-3000
III Capturing Color with the DeltaSphere-3000 Your system is set up, you’ve created a ‘scene’, and you’ve scanned for range from a particular location. Do not move the tripod between range and image scans. Do not move objects in the scene. -
Page 5: Range Alignment With Scenevision-3D
Select both files in the scene tree (one aligned and one not aligned). Select Align->Share Alignment with from the Edit menu. You can also remove alignment from a file with Align->Clear Alignment in the Edit menu DeltaSphere-3000 3D Scene Digitizer 9/23/05... -
Page 6: Color Alignment With Scenevision-3D
If you are not going to use part of a scan in your model, perhaps because you have better data from another scan, then you do not need to color that part of the scan. The uncolored part can be edited out in model building or model editing. DeltaSphere-3000 3D Scene Digitizer 9/23/05... -
Page 7: Model Building With Scenevision-3D
These models will be rougher than the simplified models because of this uniform decimation. • You can also select a range file, or part of a range file, and select the Create 3D Popup from Region button to produce quick models. DeltaSphere-3000 3D Scene Digitizer 9/23/05... -
Page 8: Model Editing With Scenevision-3D
Work on small areas of the model, but look at the whole model regularly to see the results. • Work on a surface at a time – a wall, a desk top, a door, a part of the floor. DeltaSphere-3000 3D Scene Digitizer 9/23/05... -
Page 9: Creating Advanced Annotations With Scenevision-3D
Select Browse External to link a file on your computer or network that is not in the scene. Select Browse Internal to link a file that is in the scene. Select the file and select Open. Select OK. DeltaSphere-3000 3D Scene Digitizer 9/23/05...