3rdTech DeltaSphere-3000 User Manual page 24

Reference Scan
As the operation loads range files you will be asked to specify the reference file in the Choose
reference file dialog box. The reference file is the scan to which all other scans of the same
scene will be aligned. Often the scan chosen is a 360° scan of the space – providing a frame of
reference for smaller scans of parts of the space. You can either choose one of the files at this
time, or cancel and choose a file during the range align procedure. (See section 9 for additional
information.)
Adding Files
It is not unusual to add files to a scene after it has been created. This is done with the Insert File
command in the File menu or by using 'drag and drop'. Using the Open File command does not
add to a scene but, rather, prompts you to close the current scene and create a new one.
DeltaSphere-3000 3D Scene Digitizer
SceneVision users have a single camera configuration file associated with their
DeltaSphere system, and that file will be suggested as the default.
23 9/23/05