Automatic Paper Selection Error - Ricoh MV310 Service Manual

May 22nd, 1995

3. Automatic Paper Selection Error

Possible Cause:
•
Defective book original size sensor(s).
•
Improper bit switch setting for original size detection.
Action:
•
Check that the book original size sensors are working properly and re-
place any defective sensor.
•
Check that settings of system switch 0D match the paper sizes being
used.
4. Scanning Start Position Error (Error Code 1-09)
Cause:
•
The shading plate is dirty.
•
The image sensor element is defective.
Action:
•
Clean the shading plate, especially around the black mark (for both
book and ADF).
•
Replace the image sensor.
MECHANICAL PROBLEMS
6-23
TROUBLESHOOTING