Skew - Ricoh MV310 Service Manual

May 22nd, 1995

3. Skew

Possible Cause:
•
An incorrect type or size of document is used.
•
The document guide is not properly set.
•
The ADF cover is not properly closed.
•
The ADF roller assembly is not properly installed.
•
The scanner rollers (pick-up, feed, R0, R1, and R2 rollers) are dirty.
•
Obstruction in the document paper path.
Action:
1. Check that a correct type of document is being used.
2. Check that the ADF cover is securely closed and check that the docu-
ment guide is properly set. Also, check that the ADF roller assembly is
properly installed.
3. Check for obstructions in the paper path.
4. If the problem still remains, do the following.
Clean the rollers with a soft cloth and water, and replace them if they are dam-
aged.
4. Multi-feed
Possible Cause:
•
An incorrect type or size of document is used.
•
The separation roller is worn or dirty.
Action:
•
Clean or replace the separation roller.
•
Check that the spring under the separation roller is properly installed.
MECHANICAL PROBLEMS
6-21
TROUBLESHOOTING