Ricoh MV310 Service Manual page 15

May 22nd, 1995
No. Name
Toner Supply Bar
9
10 Toner Application Roller
11 Development Roller
Platen Cover
12
13 Exposure Glass
CTM (Cleaning Toner
14
Magazine)
OPC Drum
15
16 Hot Roller
Cleaning Pad
17
18 Hot Roller Strippers
19 Paper Feed-out Rollers
20 Fusing Pressure Roller
Transfer Roller
21
Paper Feed Rollers (100
22 Sheet Cassette)
23 Registration Roller
Paper Feed Pressure
24
Rollers
Paper Feed Rollers
25
OVERALL MACHINE INFORMATION
Description
This stirs up and transfers toner to the toner application
roller.
This roller transfers toner to the development roller.
This roller applies toner to the latent image on the drum.
This covers the original which was placed on the
exposure glass.
Book scanner reads the original on it.
This consists of the toner cartridge, cleaning unit, used
toner tank, charge corona unit, and quenching lamp.
The latent image is written to this Organic
Photoconductor Drum.
Heat from this roller fuses the toner to the copy paper.
This cleans up and spreads silicone oil on the surface
of the hot roller.
These take the paper off the hot roller after fusing.
These feed the paper out of the printer.
This applies pressure to the paper during fusing.
This applies a charge to the paper to pull the toner off
the drum and onto the copy paper.
These pick up the top sheet of paper from the stack in
the optional 100 sheet cassette and feed it into the
printer.
This carries out the registration process.
These feed paper from the cassette or bypass feed slot
into the printer.
These pick up the top sheet of paper from the stack in
the cassette and feed it into the printer.
1-7
COMPONENT LAYOUT