Scanner Switches - Ricoh MV310 Service Manual

SERVICE TABLES AND PROCEDURES
BIT SWITCHES

4.2.2. Scanner Switches

Scanner Switch 00
No FUNCTION
0 Not used
1 Not used
Maximum transmittable
document length
2 Bit 3 2 Setting
0 0
3 0 1 1200 mm
1 0
1 1
OR processing in immediate
tx
0: Disabled 1: Enabled
4
5 Not used
to
7
Scanner Switch 01 - Not used (do not change the factory settings).
Scanner Switch 02 - Not used (do not change the factory settings).
Scanner Switch 03 - Not used (do not change the factory settings).
Scanner Switch 04 - Not used (do not change the factory settings).
Scanner Switch 05 - Not used (do not change the factory settings).
Scanner Switch 06 - Not used (do not change the factory settings).
Scanner Switch 07 - Not used (do not change the factory settings).
Scanner Switch 08 - Not used (do not change the factory settings).
Scanner Switch 09 - Not used (do not change the factory settings).
Scanner Switch 0A - Not used (do not change the factory settings).
Scanner Switch 0B - Not used (do not change the factory settings).
Scanner Switch 0C - Not used (do not change the factory settings).
Scanner Switch 0D - Not used (do not change the factory settings).
Scanner Switch 0E - Not used (do not change the factory settings).
Scanner Switch 0F - Not used (do not change the factory settings).
Do not change the settings.
Do not change the settings.
If the user wants to send very long documents such as
well logs, select 14 m or a higher setting.
600 mm
14 m
Not used
0: The machine scans once every 4 motor steps
(Standard), or once every 2 motor steps (Detail), and
transmits the line without OR processing. The motor
step is always 1/15.4 lines/mm.
1: The machine OR processes the scanned lines as
explained in section 2.1.3 - 6 "Sub-scan Resolution
Conversion". Toner may be used up quicker if OR
processing is enabled.
Do not change the settings.
COMMENTS
4-28
May 22nd, 1995