Ricoh MV310 Service Manual page 145

May 22nd, 1995
Communication Switch 13
No FUNCTION
Immediate transmission:
0
Interval between dialing
to
attempts to the same
7
destination
Communication Switch 14 - Not used (do not change the factory settings).
Communication Switch 15 - Not used (do not change the factory settings).
Communication Switch 16 - Not used (do not change the factory settings).
Communication Switch 17 - Not used (do not change the factory settings).
Communication Switch 18 - Not used (do not change the factory settings).
Communication Switch 19 - Not used (do not change the factory settings).
Communication Switch 1A - Not used (do not change the factory settings).
Communication Switch 1B - Not used (do not change the factory settings).
Communication Switch 1C - Not used (do not change the factory settings).
Communication Switch 1D - Not used (do not change the factory settings).
Communication Switch 1E - Not used (do not change the factory settings).
Communication Switch 1F - Not used (do not change the factory settings).
SERVICE TABLES AND PROCEDURES
COMMENTS
00 - FF (Hex) minutes
4-37
BIT SWITCHES