Ricoh MT-C1 Service Manual page 626

15 February 2006
8061 T:FIN Jobs
These SPs total the finishing methods. The finishing method is specified by the
application.
8062 C:FIN Jobs
These SPs total finishing methods for copy jobs only. The finishing method is
specified by the application.
8064 P:FIN Jobs
These SPs total finishing methods for print jobs only. The finishing method is
specified by the application.
8065 S:FIN Jobs
These SPs total finishing methods for scan jobs only. The finishing method is
specified by the application.
Note: Finishing features for scan jobs are not available at this time.
8066 L:FIN Jobs
These SPs total finishing methods for jobs output from within the document
server mode screen at the operation panel. The finishing method is specified
from the print window within document server mode.
8067 O:FIN Jobs
These SPs total finishing methods for jobs executed by an external application,
over the network. The finishing method is specified by the application.
001 Sort
002 Stack
003 Staple
004 Booklet
005 Z-Fold
006 Punch
007 Other
[0~9999999/1]
[0~9999999/1]
[0~9999999/1]
[0~9999999/1]
[0~9999999/1]
[0~9999999/1]
Number of jobs started in Sort mode. When a stored copy job is
set for Sort and then stored on the document server, the L:
counter increments. (See SP8066)
Number of jobs started out of Sort mode.
Number of jobs started in Staple mode.
Number of jobs started in Booklet mode. If the machine is in
staple mode, the Staple counter also increments.
Number of jobs started In any mode other than the Booklet mode
and set for folding (Z-fold).
Number of jobs started in Punch mode. When Punch is set for a
print job, the P: counter increments. (See SP8064)
Reserved. Not used.
5-153
SERVICE PROGRAM MODE TABLES