Ricoh MT-C1 Service Manual page 585

SERVICE PROGRAM MODE TABLES
5860* SMTP/POP3/IMAP4 (B140/B246)
020 Partial Mail Receive Timeout
[1~168/1]
Sets the amount of time to wait before saving a mail that breaks up during
reception. The received mail is discarded if the remaining portion of the mail is not
received during this prescribed time.
021 MDN Response RFC2298 Compliance
Determines whether RFC2298 compliance is switched on for MDN reply mail.
[0~1/1]
0: No
1: Yes
022 SMTP Auth. From Field Replacement
Determines whether the FROM item of the mail header is switched to the
validated account after the SMTP server is validated.
[0~1/1]
0: No. "From" item not switched.
1: Yes. "From" item switched.
025 SMTP Auth Direct Sending
Occasionally, all SMTP certifications may fail with SP5860 006 set to "2" to
enable encryption during SMTP certification for the SMTP server. This can occur
if the SMTP server does not meet RFC standards. In such cases you can use this
SP to set the SMTP certification method directly. However, this SP can be used
only after SP5860 003 has been set to "1" (On).
Bit0: LOGIN
Bit1: PLAIN
Bit2: CRAM_MD5
Bit3: DIGEST_MD5
Bit4 to Bit 7: Not Used
5863 SMP/FTP/NCP Settings (B246)
001 SMB Default User Name
This SP sets the default user name used for SMB sending.
002 SMB Default Password
This SP sets the default password used for SMB sending.
003 FTP Default User Name
This SP sets the default user name used for FTP sending.
004 FTP Default Password
This SP sets the default password for FTP sending.
006 NCP Default User Name
This SP sets the default user name used for NCP sending.
007 NCP Default Password
This SP sets the default password for NCP sending.
5-112
15 February 2006