Duplex Transport Sensor 3 - Ricoh MT-C1 Service Manual

DUPLEX UNIT

3.10.7 DUPLEX TRANSPORT SENSOR 3

[C]
[A]: Right half of table (
• The front screw is a shoulder screw. Insert the screws in the correct holes
when re-attaching.
[B]: Remove the screw in the center of the table to release the sensor bracket
below.
[C]: Transport sensor 3 (
x 2, x 1)
x 1)
3-92
15 February 2006
[B]
[A]
B246R1045.WMF