Installing The Hardware - Ricoh MT-C1 Service Manual

15 February 2006

Installing the Hardware

1. Remove the slot cover [A] (! x 2).
2. Remove the bracket [B] and attach the MLB panel [C].
3. Attach the File Format Converter board [D] to the controller board (! x 2).
4. Replace the controller board cover and rear cover.
5. Turn the main switch ON.
6. Do a network function Memory Clear (SP5801-010).
7. Do an NCS function Memory Clear (SP5801-011). This resets the network
password to "password".
NOTE: This step is necessary to make sure that the password is reset
correctly.
8. Input these default values manually (SP5836).
SP Number
5836-001
5836-002
5836-072
5836-073
5836-075
5836-076
[B]
Value SP Number
0 5836-082
0 5836-083
0 5836-085
0 5836-086
0 5836-091
1
1-153
MFP OPTIONS: B064 SERIES
[A]
[D]
[C]
B110I104.WMF
Value
1
1
1
2
50