Ricoh MT-C1 Service Manual page 584

15 February 2006
014 Copy SD to SD (Latest 4MB)
Copies the last 4MB of the log (written directly to the card from shared memory) onto
an SD card.
015 Copy SD to SD (Latest 4MB Any Key)
This SP copies the log on an SD card (the file that contains the information written
directly from shared memory) to a log specified by key number. (☛ 5.7.4)
016 Make HDD Debug
This SP creates a 32 MB file to store a log on the HDD. (☛ 5.7.4)
017 Make SD Debug
This SP creates a 4 MB file to store a log on an SD card. (☛ 5.7.4)
5858* Debug Save When
These SPs select the content of the debugging information to be saved to the
destination selected by SP5857 002.
SP5858 3 stores one SC specified by number. Refer to Section 4 for a list of
SC error codes.
001 Engine SC Error (0:OFF
1:ON)
002 Controller SC Error (0:OFF
1:ON)
003 Any SC Error
004 Jam (0:OFF 1:ON)
5859* Debug Log Save Function
001 Key 1
002 Key 2
003 Key 3
004 Key 4
005 Key 5
006 Key 6
007 Key 7
008 Key 8
009 Key 9
010 Key 10
(B140/B246)
Stores SC codes generated by copier engine
errors.
[0~1/1]
0: OFF
1: ON
Stores SC codes generated by GW controller
errors.
[0~1/1]
0: OFF
1: ON
[0~65535/1]
Stores jam errors.
[0~1/1]
0: OFF
1: ON
(B140/B246)
These SPs allow you to set up to 10 keys for log files for functions
that use common memory on the controller board. (☛5.8.1)
[-9999999~9999999/1]
5-111
SERVICE PROGRAM MODE TABLES