Ricoh MT-C1 Service Manual page 393

15 February 2006
Display
42 Download Error E42
Module ID
Card No. xx/xx
43 Download Error E43
Module ID
Card No. xx/xx
44 Download Error E44
Module ID Card No.
50 No Valid Data E50
51 (no display)
52 (no display)
53 (no display)
Details
Download result failure 3
Operation panel or language download
failed. For this error, sometimes the
message may not be displayed.
Download result failure 4
Print download failed.
Download result failure 5
The data targeted for the write
operation could not be accessed.
Download invalid
The source data for the update could
not be authenticated.
Remote ROM update failure 1
The source data for the ROM update is
corrupted because the machine is
operating and an SC code has been
issued.
Remote ROM update failure 2
The source data received for the ROM
update is corrupted; it failed a SUM
check due to its abnormal length.
Download result failure 6
The previous download in progress
was cancelled.
4-5
OVERVIEW
Recovery
• Cycle the machine
off/on and re-try
• Cycle the machine
off/on and re-try
• Turn the machine
power off/on.
• Set controller DIPSW-
1 to ON to force the
machine to write
• If you cannot force
the machine to write,
replace the controller
board.
• Use the correct SD
card.
• Turn the machine
power off/on and try
again.
• Try again with the
correct data.
• Do the download
procedure again.