Installation Procedure - Ricoh MT-C1 Service Manual

15 February 2006

1.5.2 INSTALLATION PROCEDURE

If the LCT is connected to the machine
1. Open the cover and remove the paper.
2. Lower the LCT tray. Cover the near end
sensor [A], then press the tray down
button [B] to lower the tray bottom plate.
!
CAUTION
Switch the machine off and unplug the machine before starting the
following procedure.
3. Disconnect the LCT from the machine.
4. Remove the LCT upper cover [C].
LG/B4 FEEDER KIT (B474)
[A]
[C]
1-31
[B]
B474I507.WMF
B474I504.WMF