Ricoh MT-C1 Service Manual page 597

SERVICE PROGRAM MODE TABLES
6113* Punch Hole Adjustment (B064/B140)
001 2-Holes
Adjusts the punch hole position in the sub-scan direction for the punch unit with
two punch holes.
[–7.5~+7.5/0.5 mm]
A larger value shifts the punch holes towards the edge of the paper.
002 3-Holes
Adjusts the punch hole position in the sub-scan direction for the punch unit with
three punch holes.
[–7.5~+7.5/0.5 mm]
A larger value shifts the punch holes towards the edge of the paper.
6113 Folder Position Adjustment (B246)
This SP corrects the folding position when paper is stapled and folded in the Booklet
Finisher.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 B5 SEF
005 DLT SEF
006 LG SEF
007 LT SEF
008 Custom Size
6114 Folding Number
This SP sets the number of times the folding rollers are driven forward and reverse
to sharpen the crease of a folded booklet before it exits the folding unit of the Booklet
Finisher. When set at the default (0):
• The folding blade pushes the center of the stack into the nip of the folding roller.
• The folding rollers rotate ccw to crease the booklet, reverse cw, then rotate ccw
again to crease the booklet fold twice before feeding to the folding unit exit rollers.
[1~6/0/1]
0:2, 1:5, 2:10, 3:15, 4:20, 5:25, 6:30 passes
[-3~+3/0/0.2 mm]
+ Value: Shifts staple position toward the crease.
- Value: Shifts staple position away from the crease.
5-124
15 February 2006
Feed Out Feed Out
Feed Out Feed Out
B132S924.WMF