Mfp Options: B246 Series; Overview - Ricoh MT-C1 Service Manual

15 February 2006

1.24 MFP OPTIONS: B246 SERIES

1.24.1 OVERVIEW

To make it easy to install MFP options, there are 5 slots for boards (B1, B2, B3, A1,
A2) and 3 slots (C1, C2, C3) for SD cards on the controller box. Each board or SD
card must be inserted in its assigned slot. The correct slots for each option are
shown on the decal attached to the controller box cover (shown in the diagram).
Here is a list of the controller options that can be installed on a B246 Series
machine.
Slot No.
--- B829-03
A2 B609-04
B1 B825
1
B2* 826
B2 B581-01
B2 B582-01, 02
B2 B679
B2 B818
B3 G381
C1 System
2
C2* B735
C2 B861
C2 B659
C2 B525-15
C3 B828
C3 Service
1
* Only one of these boards can be inserted at a time.
2
* This is the only SD card slot available for applications. If more than one application is to be used,
the applications must be merged onto one SD card. (☛1.23.1)
Name
Copy Data Security Unit Type C (IPU Option)
File Format Converter Type C
USB Host Interface Unit Type A
Bluetooth Interface Unit
IEEE 1394 Interface Board
IEEE 802.11b
IEEE1284 B679
Remote Communication Gate Type CM1
Gigabit Ethernet G381
System Slot (Holds the system software. Never
remove this SD card!)
Data Overwrite Security Unit Type C
Java VM Card
Printer/Scanner Kit
PS3
Browser Unit Type B
SD card for machine firmware update by the
customer engineer. Also for Browser Unit B828
1-175
MFP OPTIONS: B246 SERIES
B246I999.BMP
Section
☛1.24.13
☛1.24.11
☛1.24.15
☛1.24.10
☛1.24.16
☛1.24.14
☛1.24.12
☛1.24.8
☛1.24.7
☛1.24.5
☛1.24.6
---
☛1.24.9
☛1.24.3
☛1.24.4