Ricoh MT-C1 Service Manual page 520

15 February 2006
2934* Transfer Current On/Off Timing (Tray 3)
001 La1
002 La1f
003 Lc1r
004 Lc1
005 La2
006 La2f
007 Lc2r
008 Lc2
009 La3
010 La3f
011 Lc3r
012 Lc3
Adjusts on transfer current ON timing for front side copying.
[–30~+30/1 mm]
Adjusts the area where transfer current is applied for the
leading edge during front side copying.
[0~+20/1 mm]
Adjusts the area where transfer current is applied for the
trailing edge during front side copying.
[0~+20/1 mm]
Adjusts the transfer current OFF timing for front side
copying.
[–30~+30/1 mm]
Adjusts on transfer current ON timing for back side copying.
[–30~+30/1 mm]
DFU Adjusts the area where transfer current is applied for the
leading edge during rear side copying.
[0~+20/1 mm]
Adjusts the area where transfer current is applied for the
trailing edge during back side copying.
[0~+20/1 mm]
Adjusts the transfer current OFF timing for back side
copying.
[–30~+30/1 mm]
Adjusts the transfer current ON timing for copying thick
paper from Tray 3.
[–30~+30/1 mm]
Adjusts the transfer current OFF timing for the leading edge
length when copying thick paper from Tray 3.
[0~20/1 mm]
Adjusts the transfer current ON timing for the trailing edge
length when copying with thick paper from Tray 3.
[0~20/1 mm]
Adjusts the transfer current OFF timing for copying with
thick paper from Tray 3.
[–30~+30/1 mm]
5-47
SERVICE PROGRAM MODE TABLES