Name And Functions Of Indications On Remote Controller - Toshiba RAS-13G2KCVP-T Service Manual

9-4-3. Name and Functions of Indications on Remote Controller

[Display]
All indications, except for the clock time indicator, are displayed by pressing the
1
Transmission mark
This transmission mark
remote controller transmits signals to the indoor
unit.
2
Mode indicator
Indicates the current operation mode.
(A : Automatic control,
3
Temperature indicator
Indicates the temperature setting.
(17°C to 30°C)
4
PURE indicator
Shows that the electrical air purifying operation is
in progress.
5
FAN speed indicator
Indicates the selected fan speed.
AUTO or five fan speed levels
(LOW , LOW
+
HIGH ) can be shown.
Indicates AUTO when the operating mode is
either AUTO or
10
1
11
6
indicates when the
: Cool, : Dry)
, MED , MED
+
: Dry.
4
3
12
9
2
8
13
7
14
5
6
TIMER and weekly timer indicator
The time setting for timer operation and weekly
timer function is indicated.
The current time is always indicated except
during TIMER operation.
7
Hi-POWER indicator
Indicates when the Hi-POWER operation starts.
Press the Hi-POWER button to start and press it
again to stop the operation.
8
(PRESET) indicator
Flashes for 3 seconds when the PRESET button is
pressed during operation.
The mark is shown when holding down the
button for more than 3 seconds while the mark is
flashing.
Press another button to turn off the mark.
9
POWER-SEL
Indicates the selected POWER-SEL level.
,
( 100%,
10
A, B change indicator remote controller
When the remote controller switching function is
set, "B" appears in the remote controller display.
(When the remote controller setting is "A", there is
no indication at this position.)
11
Comfort sleep
Indicates when comfort sleep is activaled.
Press comfort sleep button to select function.
12
Quiet
Indicates when quiet is activated.
Press Fan button to start and press it again to select
other fan speed for operation.
13
Swing
Indicates when louver is swing.
Press swing button to start the swing operation
and press it again to stop the swing operation.
14
ECO indicator
Indicates when the ECO is in activated.
Press the ECO button to start and press it again
to stop operation.
- 58 -
FILE NO. SVM-15058
button.
75%, 50%)