Toshiba RAS-13G2KCVP-T Service Manual page 51

Notes
1. Place the remote control where the indoor unit can receive the signal. This will increase the accuracy of the timing between the remote control and the air
conditioning unit.
2. The ON/OFF timer can be set during the WEEKLY TIMER operation. In this situation, the air conditioner will first follow the normal timer until it is complete;
then, it will return to the WEEKLY TIMER function.
3. During WEEKLY TIMER operation, all of operation such as MODE, TEMP, FAN, Hi-POWER, ECO and etc., can be adjusted but when the clock reaches
the program setting, the operation will return to the set items in the program.
4. When the remote control is sending a signal to the air conditioner, avoid interference from objects that can block the signal.
5
Press
6
Press
•
The temperature can be set between 17°C and 30°C.
7
Press
8
Add operations, if required.
•
Press
•
Press
9
Adding or editing the program.
The program can be set to perform on all the required days until
confirm the setting
If adding or editing a program is required, please repeat steps
confirmation.
!
After adding or editing, press
Weekly timer running
Next program
Timer ON or OFF
*Point remote control at air conditioner receiving module then, press SET button until
you hear the "PiPi" sound. This means the setting operation has been completed.
As the air conditioner is receiving the signal, you will hear separate "Pi" sounds
corresponding to the number of days in the selected setting.
An incomplete setting is indicated if the TIMER lamp is blinking. Press
- 51 -
to select desired operation.
or to select desired temperature.
TEMP.
to select the desired fan speed.
to use ECO operation
to use Hi-POWER operation.
!
.
Operating Mode
Next operation
time
FILE NO. SVM-15058
is pressed to
2 8
- before setting
to confirm the setting*.
Display after
pressing SET
button
Operating Temperature
and Fan speed
twice.