Toshiba RAS-13G2KCVP-T Service Manual page 113

No. Replacement part name
5
Side cabinet
6
Fan motor
Work procedure
1. Side cabinet (right)
1) Perform step 1 in 2 and all the steps in 3.
2) Remove the fixing screw (ST1TØ4 × 10L 4
pcs.) used for securing the side cabinet to
the bottom plate and valve fixing panel.
2. Side cabinet (left)
1) Perform step 1 in 2.
2) Remove the fixing screw (ST1TØ4 × 10L
1 pc.) used to secure the side cabinet (left)
onto the heat exchanger.
3) Remove the fixing screw (ST1TØ4 × 10L
2 pcs.) used for securing the side cabinet to
the bottom plate and heat exchanger.
Detail A
1) Perform work of item 1 of 1 and 2.
2) Remove the fl ange nut fi xing the fan motor and
the propeller.
• Flange nut is loosened by turning
clockwise. (To tighten the flange nut, turn
counterclockwise.)
3) Remove the propeller fan.
4) Disconnect the connector for fan motor from
the inverter.
5) Remove the fi xing screws (4 pcs.) holding by
hands so that the fan motor does not fall.
* Precautions when assembling the fan motor
Tighten the flange nut using a tightening
torque of 4.9 N•m.
Detail B
Propeller fan
- 113 -
FILE NO. SVM-15058-1
Remarks
Hook the claw noto
the bottom plate
The back body section hooked
onto the bottom plate here.
Detail C
Fan motor
Flange nut