Name And Functions Of Indications On Remote Controller - Toshiba RAS-25G3KVSG-ND Service Manual

9-4-3. Name and Functions of Indications on Remote Controller

[Display]
All indications, except for the clock time indicator, are displayed by pressing the
1
Transmission mark
This transmission mark
remote controller transmits signals to the indoor
unit.
2
Mode indicator
Indicates the current operation mode.
(A : Automatic ,
: Heat, : Fan only)
3
Temperature indicator
Indicates the temperature setting.
(17°C to 30°C)
4
HADA CARE FLOW indicator
Air flow upward to the ceiling, provide Indirect
air flow to body and homogenize room
temperature.
5
FAN speed indicator
Indicates the selected fan speed.
AUTO or five fan speed levels
(LOW , LOW
+
HIGH ) can be shown.
10
1
11
6
15
indicates when the
: Cool, : Dry,
, MED , MED
+
3
9
8
2
16
12
7
13
4
5
14
6
TIMER and weekly timer indicator
The time setting for timer operation and weekly
timer function is indicated.
The current time is always indicated except
during TIMER operation.
7
Hi-POWER indicator
Indicates when the Hi-POWER operation starts.
Press the Hi-POWER button to start and press it
again to stop the operation.
8
(PRESET) indicator
Flashes for 3 seconds when the PRESET button is
pressed during operation.
The mark is shown when holding down the
button for more than 3 seconds while the mark is
flashing.
Press another button to turn off the mark.
9
POWER-SEL
Indicates the selected POWER-SEL level.
( 100%,
,
10
A, B change indicator remote controller
When the remote controller switching function is
set, "B" appears in the remote controller display.
(When the remote controller setting is "A", there is
no indication at this position.)
11
Comfort sleep
Indicates when comfort sleep is activaled.
Press comfort sleep button to select function.
12
Quiet
Indicates when quiet is activated.
Press Fan button to start and press it again to select
other fan speed for operation.
1 3
ECO indicator
Indicates when the ECO is in activated.
Press the ECO button to start and press it again
to stop operation.
1 4
Silent operation
Indicates the selected Silent 1 and Silent 2.
1 5
Fireplace operation
Indicates the selected Fireplace 1 and Fireplace 2.
16
Service Mode indicator
Shows during enter service Mode.
- 60 -
button.
75%, 50%)