Toshiba RAS-13G2KCVP-T Service Manual page 114

No. Replacement part name
7
Compressor
8
Reactor
Work procedure
1) Perform work of item 1 of 1 and 2, 3, 4,
5.
2) Extract refrigerant gas.
3) Remove the partition board.
(ST1TØ4 × 10L 3 pcs.)
4) Remove the sound-insulation material.
5) Remove terminal cover of the compressor, and
disconnect lead wire of the compressor from
the terminal.
6) Remove pipe connected to the compressor
with a burner.
7) Remove the fi xing screw of the bottom plate
and heat exchanger. (ST1TØ4 × 10L 1 pc.)
8) Remove the fi xing screw of the bottom plate
and valve fi xing plate.
(ST1TØ4 × 10L 1 pc.)
9) Pull upward the refrigeration cycle.
10) Remove NUT (3 pcs.) fi xing the compressor to
the bottom plate.
1) Perform work of item 1 of 2 and 3.
2) Remove screws fi xing the reactors.
(ST1TØ4 × 10L 2 pcs.)
- 114 -
FILE NO. SVM-15058-1
Remarks
Compressor
Reactor