Restoring Default Settings - PictureTel Concorde 4500 Administrator's Manual

CONFIGURING GENERAL OPTIONS FOR YOUR SYSTEM
Restoring Default
Settings
4-18
2. Choose a setting.
The Select AC Power Frequency screen appears with an
to the new setting.
3. Exit from the menu session.
The
PictureTel Ready
4. Activate the new setting by powering off the system, waiting
15 seconds, and then powering on the system.
You can reset system values to their factory default settings. When
you restore default settings, the system automatically resets all
conÞguration settings except the following, which remain at the
current setting:
Speed-dial call numbers (Dialing Directory)
Password for menus (Set General ConÞguration menu)
To restore factory default conÞguration settings:
1. Press SETUP .
2. Choose View Configuration Menu .
3. Choose Restore Default Configuration .
The Restore Default ConÞguration screen and this message
appear:
OK to reset?
4. Choose Yes .
The system automatically restores the factory default settings. For a
list of the factory default settings, refer to Appendix A, ÒFactory
Default Settings.Ó
message appears.
No
Yes
next
[X]