RESOLVING PROBLEMS
Interpreting
Warning
Messages
F Y I
Table 8-7: System Warning Messages
If you see...
Data rate too high
Data rate too low
Loss of far-end video
8-12
The following table lists the system warning messages in
alphabetical order and gives the probable cause as well as a recovery
action, when appropriate. These messages appear on the screen
preceded by
You can Þnd a listing of all system messages in Appendix C,
F.Y.I.
ÒSystem Messages.Ó
There is a network problem.
No video is received from
the far-end site.
Warning.
It means...
Do this...
1. Verify that all connections
and cabling are secure.
2. Call the network provider.
1. Verify that the far-end site
is sending a valid video
source.
2. Verify that all connections
and cabling at the far-end
site are secure.
3. Run video loopback
diagnostic tests on the far-
end video.
4. Replace the far-end Video
board, if indicated by the
test.