The default settings for this menu are:
Set Microphones
Set Audio Send Format
Set Audio Signal Processing
Select Initial G.711 Format
Setting Microphones
Your system recognizes that a PowerMic is conÞgured with your
system and automatically disables all other tabletop microphones,
except for lapel microphones which remain active. Generally, this is
the preferred mode of operation. However, you can use the
Microphones
videoconference.
You can also use the
microphones (other than a PowerMic) you have plugged into each
of the two
To set the microphone(s):
1. From the Set Audio Configuration menu, choose Set Microphones .
The Set Microphones menu appears with the available options.
The following table describes these options.
Table 5-4: Set Microphones Menu Options
Set Tabletop Microphone Mode
Setting
menu to include tabletop microphones in the
Set Microphones
(
and
) connections on the Audio board.
MIC
A
B
Option
Setting Audio ConÞguration
Default
Power Mic Only
MIC A: Lapel Microphone
MIC B: Lapel Microphone
Automatic Mode
IDEC II: On
Noise Suppression: On
Auto Gain Control: On
µ-law
menu to specify what types of
Description
Enables you to specify which of
your microphones you want to
use for tabletop use
Set
5-11