Figure 5-3: One Touch Mode Screen - PictureTel Concorde 4500 Administrator's Manual

One Touch Mode
To adjust your camera using the one touch mode:
1. Press 2 on the keypad.
The One Touch Mode screen appears:
Point the camera at a white background.
Press ZOOM IN.
Press ENTER when ready.
Press CANCEL to exit.
***Mode is reset to Auto on power up.

Figure 5-3: One Touch Mode Screen

2. Hold a sheet of white paper or a white surface in front of the
camera.
3. Press the zoom-in button until the paper fills the entire screen
display.
4. Wait 15 seconds to give the camera time to complete adjusting
automatically to the white surface.
To save the new white balance adjustment:
Press ENTER .
The Camera White Balance Adjust menu appears on the full
screen with an
[X]
To cancel the mode setting:
Press CANCEL .
The Camera White Balance Adjust menu appears.
One Touch Mode Screen
in the column.
STATUS
Adjusting the Camera
5-31