Figure 2-8: V.25 Bis Network Connection To The Data Unit - PictureTel Concorde 4500 Administrator's Manual

CONNECTING AND CONFIGURING YOUR NETWORK
2-12
2. Plug the DA-15 connector on the adapter cable into the PORT 1
connector on the Communications board V.25 bis network panel,
as shown in Figure 2-8.
V.25 bis
CTRL DA-15 connector
A
PORT
1
CTRL
B
PORT
2
Figure 2-8: V.25 bis Network Connection to the
Data Unit
3. Repeat steps 1 and 2 for a second cable, if available, by connecting
the second Data Unit to the PORT 2 connector.
4. Tighten the screws on the connectors.
5. Follow the instructions in the Meridian Data Services: Data Unit
User Guide (P0673940-S943) , and plug the power cords for the
Data Units into an AC power source.
The Data Unit powers on and performs a self test. When the test
completes, you see the
also see the light under
Sync
and lights steadily lit. You
Power Sync
steadily lit.
MODE
M-34 connector