Setting Data Port A, B, C, Or D - PictureTel Concorde 4500 Administrator's Manual

CONFIGURING PORTS
Setting Data Port
A, B, C, or D
F Y I
6-6
To change the Control Port B settings:
1. From the Configuration menu, choose Set Data Port Configuration.
The Set Data Port ConÞguration menu appears.
2. Choose Set Control Port B .
3. Choose a selection from the menu.
Either a selection menu for
appears, or a box to enter a new
4. Choose a new setting or enter a baud rate.
The Set Control Port B ConÞguration screen appears with the
new setting or rate.
PictureTel recommends the following:
F.Y.I.
For GroupShare applications, the recommended port is
Data Port A.
For GroupView 1.0, the recommended port is Data
Port B.
You can use a data port to communicate with an external
communication or computing device, such as a modem or a PC.
The Data Interface board with the Concorde¥4500 has four
data ports. Data Ports A and B are RS-232 serial ports. Data Ports C
and D can be any of the following pairs:
RS-232
RS-449
V.35
, , , and
Type Parity RTS/DTR
appears.
Baud Rate
XON/XOFF