Removing A Dialing Directory Entry; Using Auto Imux Dialing - PictureTel Concorde 4500 Administrator's Manual

Removing a
Dialing Directory
Entry
Using Auto IMUX
Dialing
If you no longer need a Dialing Directory entry, you can delete it.
To remove a Dialing Directory entry:
1. Press SETUP .
2. Choose Modify Dialing Directory .
3. Choose Remove an Entry .
A Remove an Entry screen similar to this one appears:
No. Location
View Previous Menu
*1 BOSTON
*2 MJONES
*3 ITALY
4. Select the entry you wish to remove, and press ENTER .
The Remove an Entry screen displays the current information
for your selected entry.
The following message appears at the bottom of the screen:
Remove this entry?
5. Press ENTER to remove the entry from the Dialing Directory.
Auto IMUX Dialing enables you to make calls or create Dialing
Directory entries without entering the extra digits required to
conÞgure an IMUX. It also reduces or eliminates the need for users
to know about the transmission rates involved.
To conÞgure your system for Auto IMUX Dialing, see ÒSetting a
Network InterfaceÓ on page 2-15.

Removing a Dialing Directory Entry

Remove an Entry
Lines 1st Number
1 7005631563
2 7008651000
2 7009991200
No
Yes
3-7