CONFIGURING GENERAL OPTIONS FOR YOUR SYSTEM
Setting Display of the Far-End Site Name
4-2
The default values for settings in the Set General ConÞguration
menu are:
Setting
Set Display of Far-End Site
Name
Set Screen Message Display
Set Language
Set Encryption Mode
Set Password for Menus
Set Near-End Site Name
Set Standby Timer
Set Wireless Keypad Channel
Select AC Power Frequency
By default, your system does not display far-end site names. If,
however, you are using the SG3 video transmission format, you
can set your system to display far-end site names, as follows:
Table 4-1: Display of Far-End Site Name Settings
Display Setting
Display Name Momentarily
(default)
Display Name
Do Not Display Name
Default
Display Name Momentarily
Display Normal Messages
English
Disable Encryption
Disabled
None
5 minutes
0 (All)
60 Hz
Description
Displays the name of the far-end site
for 10 seconds when you Þrst view
that site
Displays the site name of the far-end
site on the bottom of your screen
throughout the videoconference
DoesnÕt display the far-end site
name