CONFIGURING AND ADJUSTING THE VIDEO AND AUDIO
F Y I
Adjusting the White Balance
5-26
You cannot adjust the white balance, focus, or iris settings
F.Y.I.
while in a call.
You can adjust the following pan-tilt-zoom camera sources at the
near-end site:
camera
Main
camera (usually your auxiliary camera)
AUX A
camera
AUX B
When you display the menus, the current mode or status is
indicated. When you Þrst install the camera module, all camera
modes and options are set to their default settings, as shown in the
following table.
Table 5-9: Camera Power-Up Default Settings
White balance
Focus
Iris
Any changes you make to these settings through the menus are
saved.
Use the procedure in this section to adjust the near-end camera
white balance to compensate for current room lighting conditions.
Table 5-10 describes the adjustment modes.
Mode/Option
Auto
Auto
Auto
Default Setting