Setting The Wireless Keypad Channel - PictureTel Concorde 4500 Administrator's Manual

To change the current standby timer settings:
1. From the Set General Configuration menu, choose Set Standby
Timer .
The following messages appear:
_____________________________________________
Set standby delay in minutes.
Enter zero to disable standby mode
or press enter for no change.
Current delay: 5 minutes
Enter delay:
2. Type how many minutes you want to elapse before the system
goes into standby mode, and then press ENTER .
You can enter from 0 to 99 minutes.
To shut off standby mode, type 0.

Setting the Wireless Keypad Channel

The Concorde¥4500 responds to the wireless keypad through the
wireless keypad channel. Here are the guidelines for conÞguring
this channel on the system and on its wireless keypad.
If you are using a single videoconferencing system with one or
more wireless keypads, leave the systemÕs channel setting at
the default setting of zero.
The system will recognize any keypad no matter what its
channel setting is. However, you can only send signals from one
keypad to the system at a time.
Channel 0 is the universal channel number; any
F.Y.I.
F Y I
Concorde¥4500 will respond to it.
If you are using multiple videoconferencing systems within
close proximity, each using a separate keypad, choose a unique
channel number from one to seven for each Concorde¥4500
and its keypad.
Set Standby Timer
Setting the ConÞguration
4-15