Table 6-3: Set Control Port B Screen Options (Continued)
Option
Select XON/XOFF
The following table lists the Control Port B settings.
Table 6-4: Control Port B Type Settings
Setting
(default)
Disabled
Asynchronous
Network Manager
GroupShare
GroupView 1.0
(Transmit on/Transmit off)
ConÞgures the software ßow control method,
deÞned by the American Standard Code for
Information Interchange (ASCII):
used when this method is required by
Enabled,
the terminal device
data.
used when this method is not used by
Disabled,
the terminal device.
This option can be set for asynchronous devices.
Disables control port B
ConÞgures the port for asynchronous operation
ConÞgures the system when you are using a network
manager to control the system
ConÞgures the port to communicate with the optional
GroupShareª applications. This selection is not listed
if GroupShare is set on another data port.
Note: PictureTel recommends that you conÞgure
GroupShare on Data Port A.
ConÞgures the port to communicate with the
PictureTel GroupViewª document conferencing
projector. This selection is not listed if GroupView 1.0
is set on another data port.
Note: PictureTel recommends that you conÞgure
GroupView 1.0 on Data Port B.
Setting Control Port B
Description
stop and start the ßow of
to
Definition
6-5